|
box manufacturer
|
|
he ink roller caused by poor quality problems
When the ink roller shaft loose, ink roller body bending, deformation or surface damage, it will also cause the layout dirty, paste version or partial graphic is not clear. Should identify the cause, take appropriate measures to be addressed so that the ink roller and plate to maintain uniform and proper contact conditions, the damaged inking roller to be replaced in order to eliminate the fault phenomenon.
4, uneven thickness of corrugated board caused by quality problems
If the formation of corrugated cardboard surface man-made sag marks, the sag of the paper will appear imprinted quality defects, which if the full increase in printing pressure to make it easy to make the text, the layout of the line appear to paste Quality issues. In order to avoid the layout from the paste, corrugated board in the stacking, handling process, should pay attention to light, light, light pressure (to control the stacking height), avoid throwing, smashing, pressure and other bad habits of handling.
5, plate thickness caused by uneven quality problems
When the eraser plate thickness uneven, the plate layout will appear level difference. The layout is easy to place a high place, the lower the page is prone to incomplete ink, resulting in imprinting is not clear, in order to avoid the occurrence of this undesirable situation, can be used sporadic plate, the plate made of small pieces, The same plate should be used for production, so that its thickness difference is relatively small. If the system has been made a good rubber, there is poor thickness, in the partial thin plate on the back of the multi-viscose cloth make up, so that the entire plate to maintain a consistent thickness, to ensure that the printing pressure and layout inks uniform.
Cardboard box manufacturers,Custom Cardboard Boxes, Folding Carton Manufacturers, Cardboard boxes suppliers China, Carton box manufacturers, www.cardboard-box-manufacturers.com
Show Lesshe ink roller caused by poor quality problemsWhen the ink roller shaft loose, ink roller body bending, deformation or surface damage, it will also cause the layout dirty, paste version or partial graphic is not clear. Should identify the cause, take appropriate measures to be addressed so that the ink roller and plate to maintain uniform and proper contact conditions, the damaged inking roller to be replaced in order to eliminate the fault phenomenon.4, uneven thickness of corrugated board caused by quality problemsIf the formation of corrugated cardboard surface man-made sag marks, the sag of the paper will appear imprinted quality defects, which if the full increase in printing pressure to make it easy to make the text, the layout of the line appear to paste Quality issues. In order to avoid the layout from the paste, corrugated board in the stacking, handling process, should pay attention to light, light, light pressure (to control the stacking height), avoid throwing, smashing, pre...Show More
|
|
|
|
View Sussi Brown's Store (11) |
|
Your Product Has Been PowerShared™ Successfully! |
|
|
Check out Sussi Brown's Profile, Blogs, and Products! |
|
|
|
|
|
|