How to change brother printer toner |
Posted: December 12, 2019 |
Let's talk about how to proceed to change the Brother toner , a necessary operation thanks to which you can return to using your photocopier without any complications of any kind and above all without you having to deal with situations that are complex and could make it less simple the use of this type of work tool.
The initial phase of replacing Brother Toner First you need to make sure that the machine is turned on, so that you can more easily access the compartment in which the toner is contained. Once you have ascertained this particular data, you will need to proceed simply by pressing the hooks of the rear compartment: this procedure must be carried out gently so as to avoid damage to the toner container itself. The cover must then be placed so as to avoid that this part may be damaged during the extraction of the same toner: now proceed with the removal of the drum unit and the same toner, so that you can proceed with the next procedure, or carry out the actual replacement of this part.
How to replace the Brother toner Before proceeding with the next procedure always remember that, before buying the new toner, you must be sure that the Brother toner you purchased is compatible with the copier: always check the toner code previously installed so that you can avoid carrying out useless purchases that have only one final goal, or make you spend money in a totally useless way. So try to check this particular data carefully so as to have the security that the item you purchased can be installed and allows the copier to work properly.
That said, after you have removed the old toner and the drum unit, you will surely notice a green tab on the bottom of the same toner. This must be lightly pressed so that you can completely disconnect the toner from the drum unit: you will have to perform this procedure very gently so that you can have the opportunity to avoid damaging the same group.
At this point you are ready for the installation of the new toner that, first of all, must be deprived of its packaging: proceed, also in this case, with great caution so that you can have the opportunity to prevent damage to the new toner.
Once the protection represented by the packaging has been removed, you will need to put the toner in the drum unit, finding the exact position so that all the parts fit together perfectly: pushing the toner lightly you will have to feel a slight click which, in fact, confirms the correct insertion of this part in the toner group.
Once this procedure has been completed, you need to clean the corona wire so that the toner can be used and any old toner residues are removed. The tongue that you will notice must be moved from left to right repeatedly, consecutively and with a lot of delicacy, doing in such a way that this part can be properly cleaned.
Now all you have to do is insert the toner and drum unit inside the copier , letting the toner flow into the compartment until you hear a new click which, as in the previous case, confirms the correct position.
Check it out for - Printer Repair Dubai
Finally, insert the cover again and close it carefully so as to prevent the toner from falling and being damaged. Once this operation has been completed, you can proceed with the control procedure, or start a test to assess whether the toner has been installed correctly.
If yes, you will have the opportunity to see a perfect print with all the shades that are used by the copier. If there are errors or inaccuracies, you will need to disassemble the toner again and install it correctly, until the printing is done correctly. Here is how to proceed to properly perform the Brother Toner replacement procedures.
|
||||||||||||||||||
|