Sometimes it happens while using the printer it suddenly shows error 920.06 generally this error appears when the machine doesn’t properly read a temperature increase when the lamp is turned on. The main Function of Fuser in the printer is print the text on the paper while melting the toner and compressed to leave an impression on paper with the use of heat.
Here in this blog, you will find a few troubleshooting tips to fix Fuser warm up failure issue in Lexmark printer. Or you can also avail instant help from by dial a Lexmark customer support number 1-800-862-1908.
Troubleshooting Tips for the Lexmark Error Code 920.06 Fuser warm-up failure 1. First, you have to turn the machine off/on and always make sure that the fuser unit assembly is perfectly installed. 2. Always check that the proper voltage fuser is installed in the printer. 3. Carefully check all kinds of connections between LVPS card assembly and fuser. 4. On the switchable LVPS assembly ensure that proper voltage setting is used. 5. If the problem remains constant then replace the fuser unit assembly, If still, a problem doesn’t resolve then finally you have to Replace the LVPS card assembly and get rid of this problem in a printer.
If the issue doesn’t get solved after following the tips carefully. Then it’s recommended to get in touch with Lexmark customer service phone number 1-800-862-1908 for instant technical support. Here a team of Expert Technicians resolves your all type of query with real time troubleshooting techniques with 100% satisfactory result.
Source Url - http://www.123articleonline.com/articles/1007945/5-simple-tips-to-resolve-lexmark-error-code-92006-fuser-warm-up-failure-with-ease
|