1) Fill in the use report in time soon after functioning the glove box, including “user, water oxygen worth, what to do”.
2) When changing gasoline cylinders in the glove box, the strain is set to the default value ± 3mbar.
3) The every day working stress is set in accordance to the operating convenience. When not in use for a extended time, the strain is set to one-6mbar.
4) Regularly check out the wear of the gloves, examine the oil degree of the vacuum pump (amongst the upstream and downstream markings), and add the pump oil properly.
five) Cleanse the water probe as soon as every two to three months to make certain accurate detection. (Also need to have to refer to the actual circumstance of the environment in different person containers)
6) If you often use organic solvents in the glove box, it is advisable that you regularly change the organic and natural solvent adsorbent materials, not later than one yr at the newest.
glove box laboratory equipment ) Substitute the filter element frequently, no later on than two several years.
eight) According to the real use of your glove box, determine to replace the vacuum pump oil cycle, these kinds of as black and yellow pump oil, h2o or a lot more organic solvents in the pump oil. The oil alternative cycle ought to not exceed 2 a long time at the newest.
9) If a large amount of organic and natural solvent is inevitably exposed for the duration of the experiment, the cycle wants to be stopped for the experiment. Soon after the experiment, first clean and then begin the cycle.
10) When the setting in the box is poisonous or damaging fuel, the exhaust port of the vacuum pump, the exhaust port of the regeneration gasoline and the exhaust port of the cleaning valve must be fatigued to the out of doors with an exhaust pipe (when exhaust is not permitted to be outdoor, the exhaust fuel remedy should be carried out very first).
|