free raw drive recovery tool advanced\\pchstorageconfiguration\\satamodeselection\\ ought to be AHCI mode by default. CSM (Compatibility Help Module) is turned on. The existing BIOS settings usually do not fully assistance the boot device. Click the 'OK' button to enter the BIOS settings. Enter advanced CSM parameters and adjust the settings of your compatibility support module (CSM) to allow the boot device. If not, restore the bios for the default settings. The initial a single may be the Safe Boot choice. If we desire to set up a system apart from Win8/Win8.1/Win10 in UEFI mode, it can be recommended to shut it down. In addition, you'll want to spend interest to the conflict in between the CSM and the safe boot talked about in the CSM selection setting above. In view of this, we usually set it to 'Disable', and in the closed state, there is no need to take into account the second setting option. The second one will be to reset towards the setting mode/restore factory settings (ResettoSetupMode/RestoreFactoryKeys) solution. This solution is made use of to clear or restore the built-in safe startup important. Frequently, we do not need to set this solution. If your computer system is pre-installed with Win8/8.1, you have got changed the relevant setting possibilities, and now want to restore the default settings (including turning on secure boot), you can use this alternative to restore the secure boot key for the default value. Some SATA interfaces and NVMe channels may be occupied, which particular port is not necessarily, the final two SATA channels are occupied by the PCIE channel from the Asus motherboard, please refer towards the manual for precise solutions; SATA port (if you plugged in SATA1, then attempt SATA2) otherwise it'll occupy a channel using the NVME difficult drive. You may see your motherboard manual for information. http://www.google.com is occupied by NVME, so you are able to not insert other tough drives or SATA devices.
|