Isn’t it horrible to deal with a dead car just when you are about to leave for your office in the morning or in a situation when you forgot to switch off the lights while you were out on a date and your car refused to start? Dealing with such instances are never ideal, and most of us have been in this situation when our car just denied co-operating with us.
The only solution that can help you rescue such a situation is to know how to jump-start a car. This may sound easy to you, but you require proper education and knowledge to do this, otherwise jump-starting a car can go very wrong. Fret not! This article will explain the possible reasons that may result in making your car’s battery drain out and how you can jump-start your car without any trouble.
Why Did Your Car Battery Drain Out?
Some usual reasons that caused your battery to drain out are as follows:
- You might have forgotten to switch off the car’s headlight before leaving the car. This is a common issue that makes your car battery drain out.
- Leaving electronic devices on charging for longer periods can be a major cause in draining your car's battery.
Steps To Safely Jump Start a Car:
Step 1: Park the car you’ll use for jump starting and make sure that both the cars are turned off before you start the process.
Step 2: Then clamp on the positive end of the cable to the terminal which has “POS” or “+” dead battery’s positive clamp
Step 3: After that, connect the other end of the red cable to the other battery’s positive clamp
Step 4:Connect the negative end of the black cable to the same terminal of the working battery
Follow the next steps carefully once you are done with the above 4 steps.
Step 5 : Connect the second end of the black cable to any metal surface which is not painted and is under the hood of your car
Step 6: Once the last step is done you can start the car with a good battery and keep it running for at least 2-3 minutes.
Step 7 : Now start the car with a dead battery and remove the cables carefully
Step 8: Make sure you do not switch off the dead car yet and let it run for at least 30 minutes so that the battery recharges a bit.
Once your car starts after this process, let your car running for a while as it will enable the alternator of the car to recharge your car’s own battery enough to have power for the next ignition. But in case your car doesn’t start even after doing all the above steps just recheck and make sure the cable is properly connected as mentioned in the steps above.
In the worst-case scenario if your car still won’t start, then your car’s battery might be dead, and you might just need a replacement of your car’s battery. CNC Sales can help you with the best car batteries. With an extensive range of battery chargers and batteries, they have a solution suiting your specific needs that too at an affordable price. You can also call or email" class="BlackLink1 ">href="mailto:[email protected]">email them in case of any query. |
