Today we will learn how to set up a hid projector headlight for 1996 to 1998 on the Civic. Tools you require with 10mm socket, drive ratchet, Phillips screwdrivers, trim pad cleaner, wire striper, wire crimper.
The primary step is to beneath the front bumper we'll see that there are two bolts. Once the bolts are eliminated we can now move to the side where the fender and the bumper meets. There's a Philips screw, you need to ensure this screw is secured on both sides. You can refer to the guide on https://allaboutpubs.com/.
Second, at the top of the bumper, there are seven clips in the bumper, you require to take out all the 7 clips. As soon as the screws are removed, gently wiggle and tug the bumper off. Then you will see the headlight assembly.
After that, in order to remove the headlight, we'll have to eliminate 4 10 millimeter bolts. We can do that by removing the inner one, the outer one and the two on top at this moment. When the bolts are eliminated, we could draw back the headlight a little, just to reach in and unplug the harnesses.
When the projector headlights are put back to its original place, plug back in the light bulb sockets. Tight the 4 blots of the headlight and set up the bumper in. As soon as the bumper is returned into place, returned all the screws and bolts and clips, eliminate them previously. The headlight retrofitting is now total, but you need to ensure that all lighting is working securely prior to taking your vehicle out on the roadway.
|