Tensile fabric structure is mostly used to provide protection against adverse weather conditions, public space. These structures are increasingly becoming popular. Their growing popularity can explain the reasons for their ability, across a large area, without the need for any additional mechanical support. Tensile fabric structure is also very beautiful. Tensioned fabric structures and airdome tensioning structure with more translucent than with iron or any other material covering structure. They can also be designed with different dynamic shape. These properties make them ideal covered tennis courts, football field, soccer and other sports facilities. The popularity of tensioned membrane structure made contribution is another feature of the lower installation cost. Construction of membrane structure is steel and concrete than construction in a more cost-effective. Per square meter of construction of these structures is one of the low cost. Stretch fabric strength and service life, maintenance cost, but also can save a lot of money. Major cost savings to reduce setup time. This is because of the support structure and fabric membrane is manufactured in advance, and assembled on site. A tensioned fabric structures, in order to achieve a fenced enclosure, using fabric tensile strength. Must be in tight to every part of the fabric. The basic rule is stable, must be taut fabric structure curve equally in opposite directions, the crown of its dimensional stability. Elastic fabric canopy, tensioned membrane structure is a complex three-dimensional forms of realization, but by cutting the fabric bonded together, so that the final 3 dimensional shape. The fabric is mounted in the process of loading. This is called the prestretching or prestressed. Pre tension is one of the most effective ways to resist the live load, wind, snow, Tensile structure, the fabric is flexible and usually braided, is a 'live' medium, it crosses over to a greater extent than in the weaving direction diagonal plane, it can be most easily seen by a net settlement. Some fabric can also be in one direction than in the other greater tensile. This is due to be woven into the warp weft marks, this is have to tighten the thread. There are three basic types of outer fabric is the most commonly used, in a tensile fabric structure. The external fabric, such as PVC ( polyvinyl chloride ) coated polyester; silicon coated glass; coated glass and Teflon PTFE ( PTFE ). If the appropriate fire retardant, can be used for all types of fabric. Know more PTFE or teflon products,just go to PTFE tape.You can find the one you need.
|