How to install a car alarm system |
Posted: July 19, 2018 |
A car alarm system is the best way to keep your car safe from the thief. And this is why day after day it is getting its popularity more and more. A lot of people are installing the best car alarm system in order to protect the car and they are doing it by either themselves or by the professionals. But if you are one of those who does not want to hire a professional and want to do it himself then I am here to help you. In this article, I will shortly give you some instruction by which you will get a clear idea on how to install the car alarm. But if you want to know it deeply I will suggest you visit techtunehub.com. So let’s begin.
The things you need First of all, you need to open the box. Then before going to install, you need to keep some tools that will help you install the car alarm. The tools you need are wiring diagram, screwdrivers, millimeter along with test probes, electric drill, wire strippers, pick tools, cable ties, a strong light, pliers, electrical tape, and either a soldering iron, or T-taps, and lastly heat shrink sleeving.
Installation -Set up the siren in any metal surface under the hood that is solid and strong. the horn of the siren should be placed in facing down so that no water can get into it. -Now drill in the rubber firewall to make a small hole. it is time to thread a siren's wire via that hole into straight the passenger compartment. -Then place the power line of the alarm near to the car battery so that it be ready and be attached later. -After that set up a fuse along to the wire that is mentioned above, and you will attach it to the battery after. -Check the manual instruction of alarm and then mount your shock sensor. -Again, drill a hole for the LED indicator in the dashboard. -Then feed indicator wire via the hole. And secure the indicator into the place with the mounting tape (double sided tape). -Now, locate those wires that can connect to the door light button. That is the button which will turn on your light whenever the car's door gets opened. -Now, simply connect the sensor to those wires. -Then, attach and secure the alarm module to all the input as well as output wires. -Mount that module under car's dashboard. -Bind all the wires together as well as stuff those under that dashboard. -Finally, connect the power wire to the battery. You are done.
You can set up the car alarm system by following these tips. I know it is a little bit confusing and need a little bit hard work. But you know, you will get what you pay for. If you do not pay for the installation you have to do that hard work for sure. But don’t worry, the hard work is worthy of it because it is going to protect your car.
|
||||||||||||||||||||||||||||||||||||||||||
|