5 Tips for Removing Hollow Wall Anchors |
Posted: May 3, 2018 |
Whether you are fastening a picture frame, mirror, shelf, or anything else on the wall, it is always good to use a hollow wall anchor to make the stud long lasting. They come in various size and shapes which make them perfect for any kind of walls including tile, plaster, drywall, hollow concrete block, etc. Besides, they are very easy to install and considered as the ideal choice for hanging decors in the wall. However, the unemployed hollow anchors don’t look so good on the wall and removing them from the wall is not easy too. The hollow anchors are made out of strong materials mostly. You simply can’t pull them out as they have prongs which put a heavy resistance which can damage the walls. So how can you remove the wall anchors from your wall? Take a while to read the below article, we have discussed some easy tips for removing the hollow wall anchors from the wall. 1. Recognize the type of anchorThere are different types of the anchor and they work in different ways. Some of the variations are not removable at all. Before you remove the anchors from your wall, at first you will need to recognize the type of the anchors. Check the anchor whether it has a center screw or not. If the anchor has a center screw head then you can remove it easily. If the hollow anchor does not come with a threaded screw then we will need to remove with another process. We will discuss it in below. 2. Remove the Screw HeadNow you will need to remove the screw head, you can use a drill machine for this process. After you remove the screw head, insert a screwdriver in the anchor’s whole as far as possible and then twist and pull the anchor at the same time. 3. Remove the anchor bodyNow you will need to the body of the anchor, use needle-nose pliers and grab the head tightly. The body of the hollow anchor will come up instantly. Do this process carefully to minimize the wall damage. 4. Fix the cracksIn the time of removing the hollow wall anchors, the upper surface of the wall will be broken and you must fix it to keep the wall nice looking. At first, clean off any kind of dust or debris completely. Then, use the cement compound to overlay the surface by using a putty knife. After that, allow the compound to dry for some hours and then provide the coating for finishing if needed. Now, wait for one day so that the area completely dry. 5. Paint the areaAfter letting the wall dry, check whether the surface is smoothed or not. If the surface still feels unsmooth, you can smooth it by using the sandpaper. After that, you will need to color the area according to the previous color of the wall. How to remove a push through wall anchorThe above-mentioned process is for the hollow wall anchors with the center screw. How can you remove the hollow anchors which come without a center screw? Read the below process for removing such hollow anchors. 1. Remove the headAt first, you will need to remove the center part of the anchor with a drill. After that, gently hit the sleeve of the anchor. Do the process slowly and carefully, otherwise, you will end up damaging the wall. Stop when the anchor is totally inside the wall. If accidentally the anchor comes out from the other side of the wall, cover the hole with a mesh tape. 2. Fill the hole with compoundNow fill the hole created by the removed anchor with the compound. Use the putty knife for this process and make sure that the hole totally fulfilled. Use second coating if necessary otherwise, moves to the next step. 3. Sand the holeWait for 24 hours and let the compound dry perfectly. After the compound dried completely, use sandpaper to smooth the whole area. Use the best quality sandpaper for a better result. After smoothing the surface, you will need to paint it. Use any kind of color that suit on the wall. How to Remove Plastic Drywall AnchorsRead the below process if you need to remove drywall anchors. Normally the plastic anchors come without a stud and they are hard to remove most of the time. The below-mentioned process is the easiest way to remove the plastic drywall anchors.
Removing the hollow wall anchor is a painful job. But with the above instruction set, we hope that you will be able to remove any kind of wall anchor quickly. http://Tips-for-Removing-Hollow-Wall-Anchors
|
|||||||||||||||||||||||||||||||||||||||
|