BKNET-0102 Welded Pipe Eddy Current Flaw Detector
|
|
|
Eddy current testing of welds is the use of eddy current technology to test the welded pipe, this type of testing is based on the premise of lossless. At the same time, we need to be clear that the welded pipe is, in general, the steel pipe that we usually say, which is a welded steel pipe.
eddy current weld testing is a non-destructive testing technique for detecting component defects by using the principle that the eddy current induced by the AC electromagnetic coil on the surface of the metal member encounters a defect. The oscillating current is generated in the conductive member by the excitation coil by the principle of electromagnetic induction, and the amount of change in the eddy current is measured by the detecting coil, thereby obtaining information on the component defect.
Eddy current testing is a non-destructive testing technique in which an alternating current electromagnetic coil induces eddy currents on the surface of a metal member. It is suitable for the detection of defects in conductive materials, including ferromagnetic and non-ferromagnetic metal materials.
BKNET-01\02 NDT weld testing equipment is used for on-line and off-line inspection of welded pipes. It has high sensitively to axial defects such as unwelded welding, dark spots and open cracks. In the production process, products are caused by welder failure. Slow and long-term injuries can be reliably detected.
BKNET-0102 Welded Pipe Eddy Current Flaw Detector performance?
Detection channel ? ? ? ? ? ? ? ? ? ? ?Double channel
Detection speed 1~500m/min(online)
Frequency range 100Hz-1MHz
Gain 0~99dB,step?0.1dB
Phase rotation 0-360??step1??
High pass 0.1Hz~650Hz
Low pass 1Hz~10000Hz
BKNET-0102 Welded Pipe Eddy Current Flaw Detector Features:
High precision end and end-to-tail signal removal?
High precision real-time, delayed alarm output
Fast digital/analog electronic balance
Memory track delay blanking function??
Non-equal amplitude phase/amplitude alarm domain?
Remote automatic help system
Synchronous alarm output for internal and external clock control?
BKN is one of the most professional ndt testing equipment suppliers and has long been committed to the development and production of bearing hardness and crack eddy current screening equipment. If you want to know more details or want a quotation, just feel free to contact us!Show LessEddy current testing of welds is the use of eddy current technology to test the welded pipe, this type of testing is based on the premise of lossless. At the same time, we need to be clear that the welded pipe is, in general, the steel pipe that we usually say, which is a welded steel pipe.eddy current weld testing is a non-destructive testing technique for detecting component defects by using the principle that the eddy current induced by the AC electromagnetic coil on the surface of the metal member encounters a defect. The oscillating current is generated in the conductive member by the excitation coil by the principle of electromagnetic induction, and the amount of change in the eddy current is measured by the detecting coil, thereby obtaining information on the component defect.Eddy current testing is a non-destructive testing technique in which an alternating current electromagnetic coil induces eddy currents on the surface of a metal member. It is suitable for the detection of d...Show More
|
|
|
|
View Nanjing BKN Automation System Co.,LTD's Store (9) |
|
Your Product Has Been PowerShared™ Successfully! |
|
|
Check out Nanjing BKN Automation System Co.,LTD's Profile, and Products! |
|
|