5 Easy Ways to Install Cree Led Light Bars On Trucks |
Posted: July 11, 2016 |
Are you the owner of a truck? Do you drive such vehicles often at night on a rough terrain? If so, you should install good lighting system that assists you to drive your truck safely and comfortably at night. Hence, the need for powerful head lights emerges. Installing cree led light bars as a part of head lights are found to be suitable for trucks. Hence, manufacturers of heavy duty trucks do install cree light bar as they provide increased visibility of the road in front of the driver while driving at night. The question is how to install these cree led light bars on your truck. There are 5 easy and best ways to install cree led light bars that you have purchased from the market on your vehicle. They include: 1. After you have selected the desired cree led light bars system suitable for your vehicle or truck, it is necessary for you to install it properly and correctly. The first and foremost way to install the cree light bar to your truck is to secure the system. Before you begin this operation, check the package and make sure that all the parts are available. This is important and vital.
2. Now you can secure the light to the bracket that needs to be mounted on your vehicle. Tighten all the screws firmly and place the bracket along with the cree led light bars system on your vehicle, where predrilled holes are made already. Using screws, nuts and bolts you can fasten the bracket along with the cree light bar fitted into it already. 3. The next step involves wiring up of the light. In this step, you need to connect the wires from the light to the relay switch. You will find two types of coloured wires, like black and red. Connect the red wire on the light to the red wire on the relay switch. Similarly, connect the black wire of the cree led light bars system to the black wire of the relay switch. For establishing good connectivity, you can either solder the red and black wires from the light bar, to the respective wires of relay switch or use butt connectors. These connectors are the best available option for achieving good connectivity or your soldering of the wires must be excellent.
5. Now the final step involves testing of the cree led light bars system before you take your vehicle on the road. You can turn the lights on and off once or twice to make sure that the relay switch is functioning in the correct way. Conclusion
|
|||||||||||||||||||||||||||||||||||||||||||
|